6-Inch Rewindable

Specifications:

  • Cable material according to drinking water regulations (KTW approved)
  • Sand slinger and mechanical seal for high performance in sand
  • High efficiency electrical design for low operation cost
  • All motors prefilled and 100% tested
  • Maximum storage temperature -15 °C to +60 °C
  • Designed for retrofitable Pt100 sensor
  • Approved Franklin Electric “Kingsbury Type“ thrust bearing
  • Non contaminating FES93 -filled design
  • Sand Fighter SiC sealing system is standard
  • Standard REW motor is now all 304SS construction

Technical Specifications:

  • 6 Inch NEMA flange with M12 studs
  • Protection: IP68
  • Starts per hour: max. 20
  • Installation position: vertical/horizontal (37kW motors may not be installed horizontally!!!)
  • Motor length in 4 metre (KTW approved)
  • Voltage specifications: 380-415 V/50 Hz, 460 V/60Hz
  • Voltage tolerance 50 Hz: -10% / +6% UN(380-415V = (380-10%)-(415+6%)
  • Voltage tolerance 60 Hz: ±10% UN
  • Motor protection: Select thermal overloads according to DIN 61947-4-1, trip class 10 or 10A, trip time <10s at 5 x IN
  • Wye/Star Delta start (pos of cables 90°)
  • Standard motor with PVC winding insulation (37kW in standard with PE2/PA insulation) for max. ambient temp. of 30°C with a min. cooling flow:
  • 4kW to 15kW v = 0.2 m/s
  • 18.5kW to 37kW v = 0.5 m/s

Options:

  • Other voltages
  • Motors in 316SS and 904L constructions
  • Motors up to 30kW with PE2/PA winding insulation for max. ambient temp. at 50°C at the same cooling conditions as standard (37kW max 45°C)
  • Pt100 temperature sensor (sold separately)
  • Lead in different lengths up to 50 metres
Be the first write a review
nan

Share this:

Reviews

There are no reviews yet.

Be the first to review “6-Inch Rewindable”

Your email address will not be published. Required fields are marked *

6-Inch Rewindable

These 6-inch rewindable motors are built for dependable operation in 6-inch diameter or larger water wells. Water lubricated thrust and radial bearings enable a maintenance free operation. The SAND FIGHTER™ SiC seal system is the standard option for applications in aggressive media, motors made of 304SS, 316SS and 904L are available

WE ARE THE PREMIERE WATER PUMP SPECIALISTS

Stallion Equipment is constantly searching the globe for more quality products to add to our ever expanding product range including... stainless steel household pressure pumps . petrol driven transfer pumps . petrol driven firefighter pumps . electronic pump controllers petrol driven flexi drive contractors pumps . float level switches pressure switches and stainless steel jet pumps

FOR MORE INFORMATION CALL US ON 0800 782 554

CHECK OUT YOUR LOCAL SUPPLIER FIND US