6-Inch Hi Temp 90C Encapsulated

Specifications:

  • Up to 90°C ambient temperature
  • Increased thrust capacity up to 30°C
  • No cooling flow in larger wells (12″/open body of water) up to 30°C ambient
  • Hermatically sealed encapsulated stator, anti trcak, self healing stator resin
  • Removable Water Block lead connector
  • Sand Fighter™ Motor with SiC-Mechanical Seal
  • High efficiency electrical design for low operation cost
  • All motors refilled and 100% tested. Max. storage temperature -15°C – +60°C
  • High temperature leads
  • Non contaminating FES 92 filled design

Technical Specifications:

  • 3.7 to 30 kW
  • 6″ NEMA double flange
  • Protection: IP68
  • Starts per hour: max. 20
  • Installation: vertical/horizontal
  • Standard voltage: 380-415 V/50 Hz, 460 V/60 Hz
  • Voltage tolerance 50 Hz: -10%/+6% UN (380-415 V = (380-10%)-(415+6%)
  • Voltage tolerance 60 Hz: ±10% UN
  • Motor protection: Select thermal overloads according to DIN 60947-4-1, trip class 10 or 10A, trip time <10s at 5 x IN
  • Insulation: Class F
  • Rated ambient temperature: 90°C
  • Cooling Flow: min. 0.16 m/s
  • DOL and Wye/Star Delta – start (pos. of cable 90°)
  • Motor length: 4 metres
  • Standard Water Well construction is cast iron epoxy coated end frames with 304SS stator shell

Options:

  • Other voltages
  • 45 kN High Thrust version
  • Motors in complete 316SS construction

Select a file to download:

Be the first write a review
nan

Share this:

Reviews

There are no reviews yet.

Be the first to review “6-Inch Hi Temp 90C Encapsulated”

Your email address will not be published. Required fields are marked *

6-Inch Hi Temp 90C Encapsulated

These 6-inch encapsulated motors, manufactured in ISO 9001 certified facilities, are built for dependable operation in 6-inch diameter or larger water wells with ambient temperature up to 90 °C. Water lubricated thrust and radial bearings enable a maintenance free operation. A special diaphragm ensures pressure compensation inside the motor.
The motor is filled with a special FES92 fluid, providing frost protection down to -15 ºC storage temperature.
The Sand fighter® SiC seal system is standard.

WE ARE THE PREMIERE WATER PUMP SPECIALISTS

Stallion Equipment is constantly searching the globe for more quality products to add to our ever expanding product range including... stainless steel household pressure pumps . petrol driven transfer pumps . petrol driven firefighter pumps . electronic pump controllers petrol driven flexi drive contractors pumps . float level switches pressure switches and stainless steel jet pumps

FOR MORE INFORMATION CALL US ON 0800 782 554

CHECK OUT YOUR LOCAL SUPPLIER FIND US