4-inch Encapsulated

Specifications:

  • Hermatically sealed stator, anti tracking, self healing stator resin prevents motor burn out
  • High efficiency electrical design for lower operating cost
  • Cable material according to drinking water regulations (VDE/ACS/KTW approved)
  • Removable Water Bloc lead connector
  • Water Lubrication and non contaminating FES93 filling liquid
  • Built In Lightning Arrestors in all 1 phase motors
  • Built In Overloads on all 3 Wire 1 phase motors
  • Built In BIAC starting switch on all 2 Wire 1 phase motors

Technical Specifications:

  • 2 Wire motors, 1 phase: 0.37 kW to 1.1 kW
  • 3 Wire motors, 1 phase: 0.75 kW to 2.2 kW
  • 3 Wire PSC motors, 1 phase: 0.25 kWto 2.2 kW
  • 3 Phase motors: 0.37 kw to 3.7 kW
  • 3 Phase High Thrust motors: 2.2 kW to 11 kW
  • 4″ NEMA flange
  • Rotation 1 phase: CCW facing shaft end
  • Rotation 3 phase: either CW or CCW (wiring change)
  • Protection: IP68
  • Insulation: Class B
  • Rated ambient temperature: 30°C
  • Cooling flow: min. 8 cm/sec or 0.8 m/s
  • Starts per hour: max.20, equally distributed
  • Installation: vertical to horizontal, shaft upwards
  • 1 Phase Voltage tolerance 50 Hz: -10% / +6% at 230 V/50 Hz
  • 3 Phase Voltage tolerance 50 Hz: -10% / +6% UN(380-415V = (380-10%)-(415+6%)
  • 3 Phase Voltage tolerance 60 Hz: ±10%
  • 1 and 3 Phase Motor protection: Select thermal overloads according to EN/DIN 61947-4-1, trip class 10 or 10A, trip time <10s at 5 x IN
  • Lip seals on Super Stainless motors, 0.25 to 2.2 kW
  • Mechanical seals on all 316SS motors & all High Thrust motors 2.2 kW to 11 kW
  • Leads fitted: up to 1.5 kW x 1.5 metre lead
  • Leads fitted: from 2.2 kW to 7.5 kW x 2.5 metre lead
  • 2 Wire motors are Plug and Pump, no control box/starter required
  • Matching FE Control Box/Starters for all 3 Wire 1 phase motors
  • Matching FE Control Box/Starters (SubStart SC) for all 3 Wire PSC 1 phase motors
  • Motor warranty void if Franklin Electric 1 phase control box/starters not used

Options:

  • 316SS constructions available
  • Hi Temp 75°C (Oil Stripper) motors available
  • Leads are VDE/ACS/KTW approved
  • Special cable lengths available to order
  • 304SS and 316SS lead hardware
Be the first write a review
nan

Share this:

Reviews

There are no reviews yet.

Be the first to review “4-inch Encapsulated”

Your email address will not be published. Required fields are marked *

4-inch Encapsulated

These motors are built for dependable operation in 4-inch diameter or larger water wells. This contractor friendly premium motor protection system protects the motor against overload, underload, overheating and rapid cycling.

WE ARE THE PREMIERE WATER PUMP SPECIALISTS

Stallion Equipment is constantly searching the globe for more quality products to add to our ever expanding product range including... stainless steel household pressure pumps . petrol driven transfer pumps . petrol driven firefighter pumps . electronic pump controllers petrol driven flexi drive contractors pumps . float level switches pressure switches and stainless steel jet pumps

FOR MORE INFORMATION CALL US ON 0800 782 554

CHECK OUT YOUR LOCAL SUPPLIER FIND US